Tag: cfw nintendo switch

[Nintendo Switch] Atmosphère 1.2.0 (Pré Lançamento)

Siga o NewsInside Podcast no Spotify AQUI. Essa semana já tem novo episódio sobre Games Nacionais

Feliz 15 de julho!

O Atmosphère consiste em vários componentes, cada um dos quais substitui / modifica um componente diferente do sistema:

Fusée: Carregador de primeiro estágio, responsável por carregar e validar o estágio 2 (TrustZone personalizado) mais o package2 (Kernel / FIRM sysmodules) e corrigi-los conforme necessário. Isso substitui todas as funcionalidades normalmente em Package1loader / NX Bootloader.
Sept: Payload usado para ativar o suporte para derivação de chave de tempo de execução em 7.0.0.
Exosphère: Customized TrustZone, para executar um Secure Monitor personalizado
Thermosphère: suporte EL2 EmuNAND, ou seja, backup e uso de imagens NAND virtualizadas / redirecionadas
Stratosphère: Sysmodule (s) customizado (s), ambos no estilo Rosalina para estender o kernel / fornecer novos recursos, e do estilo de reimplementação do carregador para enganchar ações importantes do sistema
Troposphère: patches do Horizon OS no nível do aplicativo, usados para implementar os recursos desejáveis do CFW

Melhorias:

O que Mudou? (Inglês) - Pré-lançamento 18/10/2021

boot was updated to reflect the latest official behavior for display/battery management.
- This should fix any issues that might result from running older releases on the OLED model, if you’re somehow in a position to do so.
The “target firmware” system was changed to allow the bootloader to specify an approximation, rather than the true target firmware.
- Previously we expected compliant bootloaders to inspect SYSTEM:/ to determine the specific target firmware.
- Now, we only require an approximate version, with major version == true major version and approximate version <= true version.
- This greatly simplifies bootloader requirements, and correspondingly all code for accessing SYSTEM has been removed from fusee.
  - This should result in a substantial speedup when booting emummc with fusee, as SYSTEM accesses were the most expensive thing done previously.
- This should resolve any inconsistency in firmware detection when booting via fusee vs hekate.
- This should also improve our compatibility with micro firmware releases, making it more likely that atmosphere “just works” if nothing important has changed.
Dynamic resource limit determination logic was implemented in pm to match latest official behavior.
- This greatly simplifies/makes consistent the resource limits on older firmwares, as well.
An enormous amount of refactoring was performed under the hood, including:
- Please Note: If you are a developer who uses Atmosphere-libs, a number of changes here are breaking.
  - Feel free to contact SciresM#524 for help updating your program.
- The OS namespace had many primitives implemented/made more accurate.
- Since mesosphere is now always-on, os::LightEvent (which required newer SVCs) is now globally usable (and used by stratosphere where relevant).
- Assertions are now true no-ops when building for release.
- Stratosphere is now built with -Wextra/-Werror.
- Most “common” logic in system module main.cpp files was moved into libstratosphere.
  - Please Note: main.cpp files for prior atmosphere-libs will no longer work, for a really large number of reasons.
- A number of longstanding code style issues were corrected.
- Mesosphere now uses util::BitFlagSet for SVC permissions.
- Mesosphere now puts its relocation table inside .bss, which allows that memory to be reclaimed after relocations are performed.
  - These changes save ~16KB of memory in the kernel, all said and done.
- A number of locations in stratosphere where memory could be saved were spotted and taken advantage of, leading to ~150-200KB of saved memory.
- The spl and loader system module was refactored to better reflect official logic.
- sf ipc server code was updated to only emit mitm/defer logic when that logic is actually required somewhere in process.
- tipc ipc server code was updated to reflect changes to official logic made in 13.0.0.
- Many, many other minor changes, please talk to SciresM#524 or read the relevant commits if you want to know more.
A number of minor issues were fixed, including:
- Mesosphere’s handling of SVC permissions on thread pin/unpin was updated to reflect official kernel behavior.
- util::CountTrailingZeroes() was fixed to calculate the correct value when used at compile-time.
General system stability improvements to enhance the user’s experience.

Caso você queira baixar o Pré-Lançamento, faça no link abaixo:
Download Pré-Lançamento

Caso você queira checar se a versão 1.2.0 já tenha saido, confira no link abaixo:
Download Lançamento 1.2.0 ( a etiqueta laranja de pré-lançamento sumirá quando for lançado de vez)

[Nintendo Switch] Atmosphere 1.1.0

Siga o NewsInside Podcast no Spotify AQUI. Essa semana já tem novo episódio sobre Games Nacionais

Feliz 15 de julho!

O Atmosphère consiste em vários componentes, cada um dos quais substitui / modifica um componente diferente do sistema:

Fusée: Carregador de primeiro estágio, responsável por carregar e validar o estágio 2 (TrustZone personalizado) mais o package2 (Kernel / FIRM sysmodules) e corrigi-los conforme necessário. Isso substitui todas as funcionalidades normalmente em Package1loader / NX Bootloader.
Sept: Payload usado para ativar o suporte para derivação de chave de tempo de execução em 7.0.0.
Exosphère: Customized TrustZone, para executar um Secure Monitor personalizado
Thermosphère: suporte EL2 EmuNAND, ou seja, backup e uso de imagens NAND virtualizadas / redirecionadas
Stratosphère: Sysmodule (s) customizado (s), ambos no estilo Rosalina para estender o kernel / fornecer novos recursos, e do estilo de reimplementação do carregador para enganchar ações importantes do sistema
Troposphère: patches do Horizon OS no nível do aplicativo, usados para implementar os recursos desejáveis do CFW

Melhorias:

O que Mudou? (Inglês)

1.1.0 is Atmosphère’s fifty-fifth official release.

Please be sure to update fusee when upgrading to 1.1.0. fusee-primary no longer exists, and will not work any more.

Please note: Atmosphère 1.1.0 is currently in pre-release, and issues may be found that need to be fixed before full release.

If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
1.1.0 will transition to release after a short amount of time has passed without pressing bug reports.

With thanks to the @switchbrew team, Atmosphère 1.1.0 is bundled with hbl 2.4.1, and hbmenu 3.4.1.

The following was changed since the last release:

Support was implemented for 13.0.0.
- mesosphère was updated to reflect the latest official kernel behavior.
- ncm was updated to reflect the latest official behaviors.
- erpt was updated to reflect the latest official behaviors.
  - Two new services (“sprofile”) were added to erpt, and have been fully reimplemented.
  - Please Note: These services provide a way for settings to be pushed to consoles over the internet without system update.
    - Because there appear to be no settings pushed out yet, this implementation fundamentally cannot be fully tested right now, but hopefully there are no issues once settings begin being distributed.
The LogManager system module was reimplemented.
- This system module provides services that some games use for logging.
- Atmosphere’s reimplementation supports logging to the SD card (if lm!enable_sd_card_logging is true) and to ams.TMA.
  - To control the directory where logs are saved, modify the lm!sd_card_log_output_directory setting.
- Atmosphere’s reimplementation is disabled by default (in order to save memory), but can be enabled by setting lm!enable_log_manager to true.
  - This will allow reading over logs from games which use the services (or potentially logging from homebrew in the future), which can be useful to developers.
  - Please note that when TMA is fully implemented in the future, enabling TMA will forcibly enable LogManager.
General system stability improvements to enhance the user’s experience.

Download Pré-lançamento: Por hora a versão 1.1.0 é um pré lançamento, quando virar um release estável, será pelo link abaixo
Download Lançamento

[Nintendo Switch] Atmosphere 0.20.1

Siga o NewsInside Podcast no Spotify AQUI, novos episódios mensais, gravações ao vivo na Twitch

O Atmosphère consiste em vários componentes, cada um dos quais substitui / modifica um componente diferente do sistema:

Fusée: Carregador de primeiro estágio, responsável por carregar e validar o estágio 2 (TrustZone personalizado) mais o package2 (Kernel / FIRM sysmodules) e corrigi-los conforme necessário. Isso substitui todas as funcionalidades normalmente em Package1loader / NX Bootloader;
Sept: Payload usado para ativar o suporte para derivação de chave de tempo de execução em 7.0.0;
Exosphère: Customized TrustZone, para executar um Secure Monitor personalizado;
Thermosphère: suporte EL2 EmuNAND, ou seja, backup e uso de imagens NAND virtualizadas / redirecionadas;
Stratosphère: Sysmodule (s) customizado (s), ambos no estilo Rosalina para estender o kernel / fornecer novos recursos, e do estilo de reimplementação do carregador para enganchar ações importantes do sistema;
Troposphère: patches do Horizon OS no nível do aplicativo, usados para implementar os recursos desejáveis do CFW.

Para Atualizar você pode usar o DeepSea que atualizará todos os homebrews no console.
Caso prefira atualize diretamente no Github do Atmosphere.

Download